Linear Collider Forum

Home » Machine-Detector Interface » Crossing Angles for 2 IRs » Photon Beam Dump considerations for Headon or 2-mrad IR
Photon Beam Dump considerations for Headon or 2-mrad IR [message #174] Sat, 11 December 2004 12:42
Messages: 12
Registered: November 2004
Location: SLAC
Will there be discussion of photon beam dump considerations for the 2-mrad IR at the MDI Workshop?
This looks like a particularly thorny problem, since the incoming beam has to come thru the high power
(say 1-MegaWatt) beamsstrahlung photon dump. How is the engineering done for that? How are the stringent
vacuum requirements met? The TESLA design seems to have the incoming beam come thru a 1-cm radius beampipe thru a
10-meter long photon beam dump. Can SLAC's Conventional Facilities and Beam Dump Engineering experts consider this to provide comments at the MDI Workshop?
Some References:
  1. TESLA studies:
  2. NLC Studies:

Read Message
Previous Topic:Beamstrahlung cone opening angles
Next Topic:disrupted beam files
Goto Forum:

Current Time: Wed Feb 26 17:34:43 Pacific Standard Time 2020
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.1.
Copyright ©2001-2010 FUDforum Bulletin Board Software