Linear Collider Forum



Home » Simulation » Full Simulations » Re-running a given simulations set (Re-running some simulations with modified geometry)
icon5.gif  Re-running a given simulations set [message #2296] Mon, 03 February 2014 06:09 Go to previous message
protopop
Messages: 5
Registered: January 2014
Location: UK
Thank you for the reply to my first question!

I have a few other questions now. Say I have on disk locally

/ilc/prod/clic/350gev/hzee/ILD/DST/00001338/000/hzee_dst_133 8_*.slcio

and say I want to re-simulate these events with a slightly modified ILD geometry and be able to compare with the set on DIRAC.

Looks like the corresponding "gen" set is not in the catalogue ...

/ilc/prod/clic/350gev/hzee/gen/00001338/000

I was using /ilc/prod/clic/350gev/hzee/gen/00001335/000 for the moment, and running

Mokka -U -e ./particle.tbl 1335_93_mdf1.steer

where 1335_93_mdf1.steer contains this

/Mokka/init/lcioFilename hzee_sim1335_93_mdf1.slcio
/Mokka/init/lcioWriteMode WRITE_NEW
/Mokka/init/MokkaGearFileName Gear1335_93_mdf1.xml

/Mokka/init/user consult
/Mokka/init/dbPasswd consult

/Mokka/init/detectorModel CLIC_ILD_CDR500
/Mokka/init/lorentzTransformationAngle 10 mrad
/Mokka/init/physicsListName QGSP_BERT

/Mokka/init/rangeCut 0.1 mm # Geant4 production range cut [default is 0.005 mm]
/Mokka/init/TPCCut 10 MeV # Default is 10MeV

/Mokka/init/lcioDetailedTRKHitMode VXDCollection
/Mokka/init/lcioDetailedTRKHitMode FTDCollection
/Mokka/init/lcioDetailedTRKHitMode ETDCollection
/Mokka/init/lcioDetailedTRKHitMode SETCollection
/Mokka/init/lcioDetailedTRKHitMode SITCollection
/Mokka/init/lcioDetailedTRKHitMode TPCCollection

# To run with modified detector parameters use command line option '-U'
/Mokka/init/globalModelParameter Ecal_nlayers1 17
/Mokka/init/globalModelParameter Ecal_nlayers2 8
/Mokka/init/globalModelParameter Ecal_radiator_layers_set1_thickness 2.4
/Mokka/init/globalModelParameter Ecal_radiator_layers_set2_thickness 4.8
# (above numbers from http://agenda.linearcollider.org/getFile.py/access?contribId =50&sessionId=9&resId=0&materialId=slides&co nfId=5686)

# this simply sets hzee_gen_1335_93.stdhep as input
/Mokka/init/initialMacroFile 1335_93_mdf1.g4macro

/Mokka/init/printLevel 1
/Mokka/init/BatchMode true


So, does anyone know exactly ...

1) How can I find the corresponding generated (.stdhep) events ?
2) Where could I get the correct Mokka settings for this set ?
3) Is the particle.tbl file needed
 
Read Message icon5.gif
Read Message
Read Message
Read Message
Previous Topic:How to count events in .stdhep file
Next Topic:Recalibration needed after change in geometry ?
Goto Forum:
  


Current Time: Wed Aug 15 23:32:24 Pacific Daylight Time 2018
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.1.
Copyright ©2001-2010 FUDforum Bulletin Board Software